Huawei SUN2000-50KTL-ZHM3 User Manual page 25

SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual
●
●
Site Requirements
●
●
●
Mounting Structure Requirements
●
●
●
●
Installation Angle Requirements
The SUN2000 can be wall-mounted or support-mounted. Requirements for the
installation angle:
●
●
Figure 4-1 Installation angle
Issue 03 (2022-08-30)
Do not install the SUN2000 in a place within children's reach.
The SUN2000 will be corroded in salt areas, and the salt corrosion may cause
fire. Do not install the SUN2000 outdoors in salt areas. A salt area refers to
the region within 500 m from the coast or prone to sea breeze. The effect
from sea breeze depends on weather conditions (such as typhoon and season
wind) or terrains (such as dams and hills).
The SUN2000 should be installed in a well-ventilated environment to ensure
good heat dissipation.
If the SUN2000 is installed in a place exposed to direct sunlight, the power
may decrease as the temperature rises.
You are advised to install the SUN2000 in a sheltered place or install an
awning over it.
The mounting structure where the SUN2000 is installed must be fire resistant.
Do not install the SUN2000 on flammable building materials.
The SUN2000 is heavy. Ensure that the installation surface is solid enough to
bear the weight load.
In residential areas, do not install the SUN2000 on drywalls or walls made of
similar materials which have a weak sound insulation performance because
the noise generated by the SUN2000 is noticeable.
Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to
facilitate heat dissipation.
Do not install the SUN2000 with a front tilt, excessive back tilt, side tilt,
horizontally, or upside down.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
18