Miele PUR 98 D Operating And Installation Instructions page 31

 Holding the installation frame
securely, remove the two fixing
screws and extend the installation
frame to its maximum length.
 Replace the screws.
The directional unit from recirculation kit
DUI 32 (optional accessory) is installed
for recirculation mode (RM):
 Bend the four retaining tabs on the
installation frame outward.
 Place the power cord inside the
installation frame.
 Install the directional unit as shown.
Note the marking on the front.
 Bend the retaining tabs back and
approx. 45° inward to hold the
directional unit in place.
Installation
31