Replacing The Grease Filter; Odorfree Charcoal Filter - Miele PUR 98 D Operating And Installation Instructions

After cleaning
 After cleaning, leave the filters on an
absorbent surface to dry.
 When removing the filters for
cleaning, also clean off any
accessible oil or fat buildup from the
housing. Doing so will prevent a fire
hazard.
 Reinstall the grease filters. When
inserting the filters, make sure that
the locking clip is facing down.
 If the filters have been installed
incorrectly, you can insert a small
screwdriver into the slit to disengage
the locking clip.

Replacing the grease filter

Regular usage and cleaning can cause
the filter surfaces to become worn.
If you identify any damage, replace the
grease filters.
Grease filters are available to order via
Miele Customer Service (see end of
these operating instructions for contact
details) or from your Miele dealer.
Cleaning and care

OdorFree Charcoal Filter

With recirculation mode, a charcoal
filter must be installed in addition to the
grease filters. The charcoal filter is
designed to absorb cooking odors.
The charcoal filter is installed in the
canopy above the grease filters.
Charcoal filters are available to order via
the Miele Web Store, Miele Technical
Service (see end of this manual for
contact details), or from your Miele
dealer. The model designations are
listed in the "Technical data" chapter.
How to install/replace a charcoal
filter
 Remove the grease filters before
fitting or replacing a charcoal filter.
 Take the charcoal filter out of its
packaging.
 Press the charcoal filter into the
frame.
 Reinsert the grease filters.
21