Summary of Contents for ETEKCITY Luminary EKS-L221-SUK
Page 1
Luminary Kitchen Scale ™ Model: EKS-L221-SUK User Manual Questions or Concerns? support.eu@etekcity.com...
Page 2
Thank you for purchasing the Luminary Kitchen Scale by Etekcity. ™ If you have any questions or concerns, please reach out to our helpful Customer Support Team at support.eu@etekcity.com. We hope you enjoy your new kitchen scale!
Table of Contents Package Contents Specifications Important Safety Information Function Diagram Display Diagram Using Your Scale Troubleshooting Warranty Information Customer Support Package Contents 1 x Luminary Kitchen Scale 1 x USB Charging Cable 1 x Quick Start Guide...
Specifications Weight Capacity 10 kg / 10000 mL / 353 oz / 22 lb g / mL (water/milk) / fl’oz (water/milk) / Units oz / lb:oz Increments 1 g / 0.05 oz Auto-Off 180 seconds Battery 300mAh Li-ion Battery Input 5.0V 500mA (USB Type-C Charging) Dimensions 230 x 170 x 27 mm / 9.1 x 6.7 x 1.1 in...
READ AND SAVE THESE INSTRUCTIONS Important Safety Information To avoid damage to this scale, please read and follow all instructions and safety guidelines in this manual. Scale • Do not exceed the 10 kg / 22 lb weight capacity, as it will damage the scale.
Page 6
Batteries • The display will show “LO” when the battery needs to be charged. • Insert the USB charging cable into the USB charging socket. • Plug the USB charging cable into a DC 5V adapter and plug into an outlet.
Using Your Scale Note: • For accurate results, always place the scale on a hard, flat surface, and keep the scale away from dirt, dust, vibrations, wind, air currents, and electromagnetic interference. • When you turn on the scale, choose units, or use the tare function, wait for the display to read “0.00”...
Page 10
Zero / Tare Function Whenever you measure items inside a container, you can use the tare function to remove the container’s weight from the final measurement. to turn on the scale. Make sure the display reads “0.00”. If the screen does not display “0.00” automatically, tap to adjust to zero.
Page 11
Unit Conversion To change the unit of measurement, tap UNIT until the display shows your desired unit of measurement. Hold Function HOLD to lock the measurement data on the display. Tap HOLD again to unlock the display. UNIT Note: In hold mode, will not work.
Troubleshooting Problem Possible Solution The scale may need to be charged. Plug in the USB Scale does not turn on. power cord and charge for 2 hours. Place scale on a level surface. Keep scale away from dirt, dust, vibrations, wind, air Reading is inaccurate.
Page 13
Instructions for Users on Removal, Recycling and Disposal of Used Batteries To remove the batteries from your equipment or remote control, reverse the procedure de- scribed in the owner’s manual for inserting batteries. For products with a built-in battery that lasts for the lifetime of the product, removal may not be possible for the user.
Order ID Date of Purchase TERMS & POLICY Etekcity Corporation warrants all products to be of the highest quality in material, craftsmanship, and service, effective from the date of purchase to the end of the 2-year warranty period. If you have any questions or concerns about your new product,...
Customer Support Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support.eu@etekcity.com * Please include your order ID when contacting customer support.
Page 16
Connect with us @EtekcityUK NF111221AL-M2.1_0921EKS-L221-SUK...
Need help?
Do you have a question about the Luminary EKS-L221-SUK and is the answer not in the manual?
Questions and answers