Page 2
Thank you for purchasing the Luminary Kitchen Scale by Etekcity. If you have any questions or concerns, please reach out to our helpful Customer Support Team at support@etekcity.com. We hope you enjoy your new kitchen scale!
Table of Contents Package Contents Specifications Important Safety Information Function Diagram Display Diagram Using Your Scale Troubleshooting Warranty Information Customer Support Package Contents 1 x Luminary Kitchen Scale 1 x USB Charging Cable 1 x Quick Start Guide...
Specifications Weight Capacity 353 oz / 22 lb / 10 kg / 10000 mL oz / lb:oz / g / mL (water/milk) / Units fl’oz (water/milk) Increments 0.05 oz / 1 g Auto-Off 180 seconds Battery 300mAh Li-ion Battery Input 5.0V 500mA (USB Type-C Charging) Dimensions 9.1 x 6.7 x 1.1 in / 230 x 170 x 27 mm...
READ AND SAVE THESE INSTRUCTIONS Important Safety Information To avoid damage to this scale, please read and follow all instructions and safety guidelines in this manual. Scale • Do not exceed the 22 lb / 10 kg weight capacity, as it will damage the scale.
Page 6
Batteries • The Display will show “LO” when the battery needs to be charged. • Insert the USB charging cable into the USB charging socket. • Plug the USB charging cable into a DC 5V adapter and plug into an outlet.
Using Your Scale Note: • For accurate results, always place the scale on a hard, dry, flat surface, and keep the scale away from dirt, dust, vibrations, wind, air currents, and electromagnetic interference. • When you turn on the scale, choose units, or use the tare function, wait for the display to read “0.00”...
Page 10
Zero / Tare Function Whenever you measure items inside a container, you can use the tare function to remove the container’s weight from the final measurement. to turn on the scale. Make sure the display reads “0.00”. If the screen does not display “0.00” automatically, tap to auto-adjust to zero.
Page 11
Unit Conversion To change the unit of measurement, tap UNIT until the display shows your desired unit of measurement. Hold Function HOLD to lock the measurement data on the display. Tap HOLD again to unlock the display. UNIT Note: In hold mode, will not work.
Troubleshooting Problem Possible Solution The scale may need to be charged. Plug in the USB Scale does not turn on. power cord and charge for 2 hours. Place scale on a level surface. Keep scale away from dirt, dust, vibrations, wind, air Reading is inaccurate.
Page 13
Federal Communication Commission Interference Statement – Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
2 years from the date of original purchase. Etekcity agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase.
Page 15
Etekcity will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty. This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty.
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@etekcity.com Toll-Free: (855) 686-3835 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support.
Page 17
Connect with us @Etekcity HS090721AC-M1_0821EKS-L221-SUS...
Need help?
Do you have a question about the EKS-L221-SUS and is the answer not in the manual?
Questions and answers
Unit does not hold a charge