Crestron HD-RX-4K-210-C-E Quick Start Manual

Crestron HD-RX-4K-210-C-E Quick Start Manual

Dmps lite 4k multiformat 2x1 av switch and receiver

Advertisement

HD-RX-4K-210-C-E and HD-RX-4K-210-C-E-POE
DMPS Lite™ 4K Multiformat 2x1 AV Switch and Receiver
The
HD-RX-4K-210-C-E
and
HD-RX-4K-210-C-E-POE
4K multiformat AV switchers and receivers that provide HDMI
switching and audio presentation capabilities in areas such as
conference rooms and classrooms.
In the Box
1
HD-RX-4K-210-C-E or HD-RX-4K-210-C-E-POE
DMPS Lite™ 4K Multiformat 2x1 AV Switch and Receiver
Additional Items
4
Anchor, Drywall, Plastic (2053825)
4
Screw, 8-15 x 19 mm (2054601)
2
Connector, 5-Pin (2003577)
5
Connector, 2-Pin (2003574)
HD-RX-4K-210-C-E Only
1
Power Pack, 24 VDC, 1.25 A, 100-240 VAC (2045870)
are DMPS Lite™
®
video
The device can be mounted onto a flat surface such as a wall or the
underside of a table. The device can also be mounted onto a rack rail.
Wall Mounting (HD-RX-4K-210-C-E Shown)
Install the Device
Quick Start
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HD-RX-4K-210-C-E and is the answer not in the manual?

Questions and answers

Summary of Contents for Crestron HD-RX-4K-210-C-E

  • Page 1 The device can be mounted onto a flat surface such as a wall or the underside of a table. The device can also be mounted onto a rack rail. Wall Mounting (HD-RX-4K-210-C-E Shown) In the Box HD-RX-4K-210-C-E or HD-RX-4K-210-C-E-POE DMPS Lite™...
  • Page 2: Connect The Device

    CATx cable that connects the device to a DM Lite transmitter. Do not connect power to a DM Lite transmitter that is to be powered by the HD-RX-4K-210-C-E or HD-RX-4K-210-C-E-POE. The Ethernet port of the HD-RX-4K-210-C-E-POE is a PoE+...
  • Page 3 Quick Start HD-RX-4K-210-C-E and HD-RX-4K-210-C-E-POE DMPS Lite™ 4K Multiformat 2x1 AV Switch and Receiver Front Panel Rear Panel (HD-RX-4K-210-C-E Shown)
  • Page 4: Led Indicators

    Quick Start HD-RX-4K-210-C-E and HD-RX-4K-210-C-E-POE DMPS Lite™ 4K Multiformat 2x1 AV Switch and Receiver AUDIO Connector Pin Assignments LED Indicators The AUDIO connector uses a 5-pin terminal block for a balanced or Refer to the following table for information about the LED indicators on unbalanced analog audio output.
  • Page 5: Configure The Device

    If the transmitter has a SETUP button, pressing the button on the Registration-Room-Licenses. transmitter will also display the IP address of the HD-RX-4K-210-C-E or To connect the device to the XiO Cloud service: HD-RX-4K-210-C-E-POE. 1. Record the MAC address and serial number that are labeled on the To log in to the web interface, enter the user name and password.
  • Page 6 Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource. Crestron, the Crestron logo, DM Lite, DMPS Lite, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other www.crestron.com/model/6510861 countries.

This manual is also suitable for:

Hd-rx-4k-210-c-e-poe

Table of Contents