Intercomp PROFESSIONAL SW777 User Manual page 18

INDICATOR OVERVIEW
Baseline Setup (continued)
2: WEDGE
Manually entering values in Wedge format enables targets to be entered with respect
following parameters: Total Weight, Left Side %, Rear % and Wedge %.
1. Press the STORE/ENTER key to enter a target setup.
2. Enter setting 00. Press the STORE/ENTER key.
3. Press the 2 key to select the Wedge format.
4. Enter the Total Weight.
5. Enter the Left Side %.
6. Enter the Rear %.
7. Enter the Wedge %.
8. Enter a memory location (1-99) to save the target setup entry.
9. The screen will return to Normal weighing mode.
TARGET %
Manually entering values in the Target % format enables targets to be set with the
following parameters: Left Front %, Right Front %, Left Rear %, Right Rear %.
1. Press the STORE/ENTER key to enter a target setup.
2. Enter setting 00. Press the STORE/ENTER key.
3. Press the 3 key to select the Target % format.
4. Enter the Total Weight.
5. Enter the Left Front %.
6. Enter the Right Front %.
7. Enter the Left Rear %.
8. Enter the Right Rear %.
9. Enter a memory location (1-99) to save the target setup entry in.
10. The screen will return to Normal weighing mode.
Page 18
RFX Load Stick Systems
7005195 Rev A, August 2021