6 ) Sync; (6.1) Adjusting Horizontal Phase; 7 ) Option; (7.1) Changing Serial Communication Baud Rate - Canon JCT-TF5G Instruction Manual

( 6 ) SYNC

When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external sync)
automatically.
Move up down
by pushing
MENU UP, DOWN
SYNC
MODE EXT
H PHASE 0
(6�1) Adjusting horizontal phase
① Move the " " to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
② Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.

( 7 ) OPTION

Move up down
by pushing
MENU UP, DOWN
OPTION
BAUD RATE
9600
OUTPUT NORMAL
(7�1) Changing serial communication baud rate
① Move the " " to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
② Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.
(7�2) To change the frame rate
① Move the " " to OUTPUT by pushing the [MENU UP] and [MENU DOWN] buttons.
② Select NORMAL or FAST by pushing the [DATA UP] and [DATA DOWN] buttons.
Select the desired
value by pushing
DATA UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
• Sync system display
• H PHASE adjustment -100 to 100
• Serial baud rate setting 9600, 19200
Communication speed setting.
Set the speed to the baud rate setting
on the personal computer side.
• Frame rate setting NORMAL, FAST
27
2B996-016JA