(1.1) Changing The Setting In Manu Mode - Canon JCT-TF5G Instruction Manual

(1�1) Changing the setting in MANU mode
Move up down
by pushing
MENU UP, DOWN
SHUTTER
MODE
MANU
PART
<MODE = MANUAL>
(a) Changing the shutter speed
① Move the " " to MANU by pushing [MENU UP], [MENU DOWN] buttons.
② Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.
(b) To change the settings for partial scanning
① Move the " " to PART by pushing the [MENU UP] and [MENU DOWN] buttons.
② Select the mode you want by pushing the [DATA UP] and [DATA DOWN] buttons. (When ON or EXT is set)
③ Move the " " to the setting item you want by pushing the [MENU UP] and [MENU DOWN] buttons.
④ Select the setting values you want by pushing the [DATA UP] and [DATA DOWN] buttons.
* If PART is set to OFF, the setting values for partial scanning are not shown.
Select the desired
value by pushing
DATA UP, DOWN
MANU
250
OFF
• Shutter mode MANU, SS, E.TRG, AUTO
• Shutter speed setting
OFF, 250(1/250s), 500(1/500s), 1000(1/1000s),
2000(1/2000s), 4000(1/4000s), 10000(1/10000s),
24000(1/24000s(NORMAL)) / 27000(1/27000s(FAST)),
36000(1/36000s(NORMAL)) / 39000(1/39000s(FAST))
• Turning partial scanning on/off
OFF : Partial scanning is off
ON : Partial scanning is on
You can set the area for partial scanning.
See "7.5 Partial Scanning".
EXT : You can switch between ON and OFF by using
external controls.
* When doing partial scanning, you cannot set a shutter
speed that is slower than one vertical scan interval
determined by the set vertical scan width (ROIVW).
17
2B996-016JA