Page 1
AXIUM RX7000 User Guide www.ingenico.com 13-17 rue Pagès, 92150 Suresnes – France Banks and Acquirers International Holding SAS / 814 767 216 RCS Nanterre...
1. Introduction Thank you for choosing an Ingenico payment terminal. We recommend you to read carefully this user guide: it gives you the necessary information about safety precautions, unpacking, installation and maintenance of your terminal. The product should be used indoor only.
If the warranty label is torn or removed, the warranty will be void. CAUTION Positioning of the AXIUM RX7000 on check stand must be in such a way to make cardholder PIN (Personal Identification Number) spying infeasible. Installing device on an adjustable stand must be in such...
90% RH non-condensing at +40°C Max altitude 2000m 3.3.2 Power characteristics AXIUM RX7000 works at voltages between 8VDC and 14VDC. The Lane/7000 can be powered by several ways : An external power supply unit By POE (Power over Ethernet) By USB (12VDC) POE (Power over Ethernet) The power sourcing equipment must be compliant with IEEE802.3af...
WARNING The power supply unit provided with your equipment is specially designed for this Ingenico terminal. Do not use any other power supply. The use of a power supply with apparently similar voltage/current characteristics may damage your terminal 3.3.3 Terminal Connectivity...
(away from video terminals, PC, anti- shoplifting barriers ...). The terminal is exclusively made for indoor use. The AXIUM RX7000 device may be mounted on a flat surface, wall, or customer stand. CAUTION...
4.4 Setting the AXIUM RX7000 on the standpole adaptor Install the terminal on a flat surface is not possible on the AXIUM RX7000 as is. It is designed to be fitted on a standpole. A specific pattern by Ingenico (UPM) has been developed to fit the AXIUM RX7000.
5.4 Reboot AXIUM RX7000 There is no power key on AXIUM RX7000 . So we can use Key combination to reboot AXIUM RX7000. We can press the “#” and “yellow cancel” keys at the same time , and AXIUM RX7000 will reboot.
7. Standard CE MARKING The CE marking indicates AXIUM RX7000 complies with the requirements of European Directive 2014/53/EU on Radio Equipment for: The protection of the health and the safety of the user and any other person. The protection of the health and the safety of the user and any other person.
Need help?
Do you have a question about the AXIUM RX7000 and is the answer not in the manual?
Questions and answers