Advertisement
EchoLife HG8145V5
Quick Start for QR code
No.
3
4
5
6
7
8
9
Issue 04 (2022-11-08)
Item
Description
USB
Connects to USB storage devices.
TEL
Connects to the port on a telephone or fax machine.
LAN1-
Connects to PCs or IP set-top boxes (STBs).
LAN4
Optical
The optical port is equipped with a rubber plug and
port
connected to a fiber for upstream transmission.
The type of the optical connector connected to the optical
port can be SC/APC.
WPS
When the WLAN is on, press the WPS button (> 3s) and
release the button to start Wi-Fi protected setup (WPS)
negotiation.
Reset
Press the button for a short time to reset the device; or
press the button for a long time (longer than 10s) to
restore the device to the default settings and reset the
device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs may fail to
access the Internet. If an ONT cannot access the Internet after a
reset, contact your Internet service provider.
WLAN
Used to enable or disable the WLAN function
- When the WLAN is disabled, press the WLAN button (>
3s) and release the button to enable the WLAN.
- When the WLAN is enabled, press the WLAN button (>
3s) and release the button to disable the WLAN.
Copyright © Huawei Technologies Co., Ltd.
2 Connecting Cables
5
Hide quick links:
Advertisement
Need help?
Do you have a question about the EchoLife HG8145V5 and is the answer not in the manual?
Questions and answers
How do I install the device to start using it
The Huawei EchoLife HG8145V5 device should be installed as follows:
1. Placement:
- Do not install the ONT outdoors or in an outdoor cabinet.
- It can be mounted on a wall or placed on a desk.
- Do not install it on the ceiling or in other unsupported positions.
- Ensure a clearance of at least 10 cm on all sides for proper ventilation.
2. Connecting Cables:
- Follow the appropriate steps to connect power, fiber optic, Ethernet, and other necessary cables.
3. Indicator Check:
- Verify the status of the indicator lights to ensure proper operation.
These steps ensure safe and effective installation of the device.
This answer is automatically generated