NARDA FieldMan User Manual page 74

8 Operating modes
8.4.3 Numerical display
Two fields are available for numerical display:
• Main field: Displays current or static measured values depending on the selected
result type and detection type
• Supplementary field: Always displays static values
Detector
A selection is only available for the BFD-400-1 probe. For all other probes, RMS is spec-
ified.
Select a detector:
⇒
MEASUREMENT SETTINGS: Select a detector under Detector.
Detector Description
All measured values are recorded and displayed
RMS
as RMS values.
All measured values are recorded and displayed
Peak
as peak values.
Result type
The result types are always displayed in the supplementary field. To display them in the
main field, the result type must be selected in the selection field using the cross key.
Select a result type:
⇒
Press the ◄ ► keys repeatedly until the desired result type is displayed.
↳
The selection option depends on the selected detector:
Detector Selection via
cross key
RMS ACTUAL
(all probes)
MINIMUM
MAXIMUM
AVERAGE
MAX AVERAGE
74
Main field
Top Bottom
ACTUAL
MIN ACTUAL
MAX ACTUAL
AVG ACTUAL
MAXAVG ACTUAL
FieldMan
Availability
All probes
BFD-400-1
probe only
Supplementary
field
X Y Z MAX, MIN,
MAXAVG, AVG
Narda