Table of Contents
Advertisement
4. Remove the two-piece rubber cover on the bottom of the Mic Pod connected to the Table Hub. Connect the micro-USB
cable from the second Mic Pod.
5. Plug 2 x power cables to wall power and one each to the Table Hub power brick and Display Hub power brick, then connect
the power bricks to the correct hub.
6. Connect 2 x speakers to the Display Hub via audio inputs labeled Left and Right. Attach these using the three-pin cables
running from the speakers as designated.
7. Take the USB A-B cable (B side) and connect to the Display Hub, connect (A side) to OptiPlex.
8. Connect the USB-C cable from the camera to the Display Hub.
14
Set up the Dell Large Conference Monitor Room Kit for Microsoft Teams Rooms
Advertisement
Table of Contents
