Leviton DDS5300 Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Leviton Manuals
  4. Dimmer
  5. DDS5300
  6. Installation and operation manual

Leviton DDS5300 Installation And Operation Manual

Nsi digital dimming system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DDS 5300 / 5600 DIMMER PACK
Software Revision 1.33, Version C UL Versions
NSI DIGITAL DIMMING SYSTEM
DDS 5300 / 5600 DIMMER PACK
INSTALLATION AND OPERATION GUIDE
Software Revision 1.33, Version C UL Versions
INTRODUCTION
The NSI DDS 5300 and DDS 5600 dimmers represent a key part of a state of the art, integrated lighting control
system. These dimmers may operate in a "stand alone" mode for automated lighting of displays or may be combined
with an NSI memory lighting console for total lighting control.
The DDS 5300 provides four channels of 300 watts each while the DDS 5600 provides four 600 watt channels.
These dimmers are designed for portable or semi-permanent use for entertainment or display lighting. Several
DDS dimmer packs may be combined for more channels of lighting.
SPECIFICATIONS
Number of Channels:
Output capacity:
Input Power:
Dimmer control system:
Load filtering:
Control Input Types:
Control Wiring:
Output Connections:
Cooling System:
Load Type:
Enclosure Type:
Ambient Temperature
NSI CORPORATION
4
300 watts per channel : DDS 5300
600 watts per channel : DDS 5600
DDS 5300: 120 VAC 1200 Watts Max.
DDS 5600-15: 120 VAC 1800 Watts Max
DDS 5600-20: 120 VAC 2400 Watts Max.
Microprocessor digital phase control dimming or
zero-crossing relay mode.
> 100us rise time.
0 - 10VDC each channel on 5 pin Din connector.
MICROPLEX multiplex signal (128 channel) on
three pin XLR type connector.
DMX-512 digital signal (512 channel)
on five pin XLR optional.
Class 2 low voltage.
1 NEMA 5-15 outlet per ch. : DDS 5300.
2 NEMA 5-15 outlets per ch. : DDS 5600.
Passive internal aluminum heatsinks.
AC lighting ( tungsten ) loads only.
For indoor use only.( Utilizer dans un endroit a l' abri. )
100 degrees maximum
INTRODUCTION
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DDS5300 and is the answer not in the manual?

Questions and answers

Related Manuals for Leviton DDS5300

Summary of Contents for Leviton DDS5300

  • Page 1 The DDS 5300 provides four channels of 300 watts each while the DDS 5600 provides four 600 watt channels. These dimmers are designed for portable or semi-permanent use for entertainment or display lighting. Several DDS dimmer packs may be combined for more channels of lighting. SPECIFICATIONS...

  • Page 2: Ac Power Cable

    MOUNTING The NSI DDS 5300 / 5600 dimmer packs are designed to be mounted vertically. Each dimmer pack is provided with a mounting flanges at the top that accepts a mounting bolt or " C " clamp.The back cover can be reversed to hang the unit from a pipe.
  • Page 3 Connect the Microplex control cable to either of the three pin XLR jacks. Since both jacks are wired in parallel, another control cable may connected between the remaining jack and another dimmer pack. Many dimmer packs may be "daisy chained" together in this manner.

  • Page 4: Led Indicators

    Connect the DMX 512 cable from the control console to the male input connector. Another cable may be connected from the female connector to the male connector on another pack. Many dimmer packs may be "daisy chained" connect together in this manner.

  • Page 5: Switch Settings

    DDS 5300 / 5600 DIMMER PACK Software Revision 1.33, Version C UL Versions SWITCH SETTINGS When using any of the multiplex control systems the dip switches on the front panel of the DDS 53/5600 must be set to assign the desired dimmer channels. The switches control the dimmer channels in groups of four. See the following chart for settings.

  • Page 6: Internal Jumper Selections

    INTERNAL JUMPER SELECTIONS INTERNAL JUMPER SELECTIONS Caution: The follow procedures should be performed by qualified personnel only. Remove all power and remove the cover of the dimmer pack. Locate and change jumper settings on the firing card as indicated in the following section. Softstart The Softstart mode of operation forces at least a 1/10th second delay between the output being full off to the output being full on to allow a more gradual warming of the lamp filaments.

  • Page 7: Auto Sequencing Mode

    DDS 5300 / 5600 DIMMER PACK Software Revision 1.33, Version C UL Versions AUTO SEQUENCING MODE The DDS 53/5600 dimmers can be configured to perform stand alone Automatic Sequencing in place of Auto Lamp Test. This is useful for lighting displays and show windows. The four channels will automatically fade from one to another in a preprogrammed pattern and time selected by the front panel dipswitch whenever dipswitch #8 is up and no multiplex signal is detected.
  • Page 8 DDS 5300 / 5600 DIMMER PACK Service Information Software Revision 1.33, Version C UL Versions Service Information NSI CORPORATION...

  • Page 9: Warranty

    DDS 5300 / 5600 DIMMER PACK Software Revision 1.33, Version C UL Versions NSI Corporation Limited Warranty WARRANTY NSI Corporation Limited Warranty NSI Corporation warrants new electronics products to be free from defective materials and workmanship for a period of one (1) year from the date of purchase to the original owner when purchased from an authorized NSI dealer.

This manual is also suitable for:

Dds5600

Table of Contents