Download Print this page
Leviton DDS 5600 Quick Start Manual
Leviton DDS 5600 Quick Start Manual

Leviton DDS 5600 Quick Start Manual

Digital dimming system
Hide thumbs Also See for DDS 5600:

Advertisement

Quick Links

Leviton Digital Dimming System
DDS 5600 Dimmer Pack
INSTALLATION AND QUICK START GUIDE
Warranty
Leviton Manufacturing Co Inc. warrants this dimmer pack to be free of material and workmanship defects for a
period of one year after system acceptance or 26 months after shipment, whichever comes first. This Warranty
is limited to repair of replacement of defective equipment returned Freight Pre-Paid to Leviton Lighting & Energy
Solutions Division at PO Box 2210, Tualatin, Oregon 97062, USA. User shall call 1-800-959-6004 and request a
return authorization number to mark on the outside of the returning carton, to assure that the returned material
will be properly received at Leviton. All equipment shipped back to Leviton must be carefully and properly packed
to avoid shipping damage. Replacements or repaired equipment will be returned to sender freight prepaid, F.O.B.
factory. Leviton is not responsible for removing or replacing equipment on the job site, and will not honor charges
for such work. Leviton will not be responsible for any loss of use time or subsequent damages should any of the
equipment fail during the warranty period, but agrees only to repair or replace defective equipment returned to its
plant in Tualatin, Oregon. This Warranty is void on any product that has been improperly installed, overloaded,
short circuited, abused, or altered in any manner. Neither the seller nor Leviton shall be liable for any injury, loss or
damage, direct or consequential arising out of the use of or inability to use the equipment. This Warranty does not
cover lamps, ballasts, and other equipment which is supplied or warranted directly to the user by their manufacturer.
Leviton makes no warranty as to the Fitness for Purpose or other implied Warranties.
Software Revision 1.33
Version C UL Versions
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only)
www.leviton.com
© 2012 Leviton Mfg. Co., Inc.
Page 8
PK-93380-10-00-0C
Page 1
PK-93380-00-10-0C

Advertisement

loading
Need help?

Need help?

Do you have a question about the DDS 5600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Leviton DDS 5600

  • Page 1 Leviton is not responsible for removing or replacing equipment on the job site, and will not honor charges for such work. Leviton will not be responsible for any loss of use time or subsequent damages should any of the equipment fail during the warranty period, but agrees only to repair or replace defective equipment returned to its plant in Tualatin, Oregon.
  • Page 2 DMX512 MULTIPLEX CONTROL WIRING ......................5 Any of the channels of the DDS 5600 may be configured as NON DIM channels. This will cause the output of the channel to go to full ON whenever the input signal is over 15%. When the input signal drops to less than 10%, LED INDICATORS ..............................5...
  • Page 3 INTRODUCTION When using any of the multiplex control systems, the DIP switches on the front panel of the DDS 5600 must be The Leviton DDS 5600 dimmers represents a key part of a state of the art, integrated lighting control system.
  • Page 4 The DDS 5600 with the NEMA 5-15 plug is limited to 1800 Watts max., while the DMX 512 is the preferred type of control wiring when many dimmer channels are used, because of the high unit with the NEMA 5-20 plug will support the full 2400 Watts.