Advertisement
Available languages
Available languages
Problem
Possible cause
Steam does
Steam lock function
not stop
is activated.
automatically
after placing the
steamer head
onto the holder.
The board cover
Steam has
becomes wet or
condensed on the
there are water
board cover after
droplets on the
a long steaming
garment during
session.
steaming.
Board is shaky
The poles are not
during use.
installed properly
or the board is not
secured onto the
poles.
The board lock is
not fully inserted.
The board is not
fully secure in
vertical position.
Board cannot be
The board lock is
tilted or be used
not locked onto the
in horizontal
pole.
position.
The board tilting
lever has not been
released.
26
Solution
Press once to deactivate steam lock
) refer to
(.
Leave it to dry before storage.
Replace the board cover if it has
worn out. Purchase a new board
cover from a Philips Authorized
Service Center.
Refer to
for correct installation.
Insert the two board locks fully until
you hear a "click" sound ) refer to
(.
Make sure that the board tilting
lever is in a locked position before
attaching it to the poles ) refer to
(.
Ensure that the board lock is in a
locked position ) refer to
Ensure unlocking tilting lever to
allow board to be tilted to its
desired position.
Once a desired position is attained,
lock the tilting lever to secure
board. ( refer to
/
(.
(
Advertisement
