Advertisement
6. TROUBLESHOOTING
PROBLEM
Excessive dust in the cabinet
Uneven blasting
inadequate speed or efficiency of blast
Static electricity
Blast pattern too wide or ineffective
SHOT BLASTING CABINET
Models: SB951 & SB972
89/336/EEC
Low Voltage Directive (S.I. 1989/728)
89/336/EEC EMC Directive (S.I. 1992/3073).
93/68/EEC CE Marking Directive
EN50081-1 Generic emission standard
EN55014 Limits and methods of measurement of
radio disturbances characteristics of household
electrical appliances, portable tools and similar
electrical apparatus.
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof
of which will be required for any claim. INFORMATION: Call on 01284 757525 for a copy of our catalogue. Leave your full name, address & postcode.
01284 757500
POSSIBLE CAUSE
1 Exhaust vent or air flow is blocked.
2 Abrasive media is worn.
3 Too much abrasive media in the cabinet
4 loose air line or fittings
1 Too much abrasive media in cabinet.
2 Moisture inside cabinet
1 Abrasive media is worn
2 Pressure is too low
Dry weather conditions
Nozzle blocked or worn
Declaration of Conformity
are
in conformity with the following EEC standards and directives
Signed by Mark Sweetman
The construction files for
these products are
contacting Jack Sealey Ltd
Sole UK Distributor,
Sealey Group, Bury St. Edmunds, Suffolk.
01284 703534
REMEDY
1 Clean rear vent and keep vent away from any wall.
2 Replace the media
3 Remove excess media
4 Check and tighten all air fittings.
1 Remove excess media.
2 Check air line for moisture.
1 Replace the media
2 Check there are no supply blockages or leaks.
Control valve is fully open. Increase pressure.
Leave the workpiece to stand for a while
Check, unblock or replace nozzle
We, the sole importer into the UK, declare that the
held by the Manufacturer and may be inspected on request by
For Jack Sealey Ltd. Sole importer into the UK of Sealey
E-mail: sales@sealey.co.uk
products
listed here
7th February 2000
Quality Machinery
SB951, SB972 - 0016 - (1) - 070200
Advertisement
