Adjusting The Windscreen Washer Jets; Checking The Wiper Blades - Ford FOCUS LV Manual

Reverse gear wipe
The rear wiper will be activated
automatically when selecting reverse
gear if:
• The rear wiper is not already
switched on,
• The wiper lever is in position
or D and
• The front wiper is operating (when
set to position B).
The rear wiper will follow the front wiper
interval (at intermittent or normal speed).
Rear window washer
E71018
WARNING
Do not operate the washer for
more than 10 seconds at a time,
and never when the reservoir is empty.
While the lever is pulled towards the
steering wheel the washer will work in
conjunction with the wipers.
Once the wash/wipe cycle is completed,
the wipers will pause and then perform
one more wipe to clear the windscreen.
After releasing the lever, the wipers
operate for a short time.
Wipers and washers
ADJUSTING THE
WINDSCREEN WASHER
JETS
A, B, C
E73425
The eye ball jets can be adjusted
precisely using a pin.
CHECKING THE WIPER
BLADES
Run the tip of your fingers over the edge
of the blade to check for roughness.
Clean the wiper blade lips with water
applied with a soft sponge.
-35-
E66644