Operation Manual / 4 Product description / A100-M axial
6
Periodic maintenance
6.3
Cleaning the slotted diffuser
Remove the diffuser (see Removing the compressor casing [➙ 63]).
Figure 22: Cleaning the slotted diffuser
Clean the diffuser slots (S).
When cleaning, please note that this should only take place using compressed air at low
pressure, a brush and a moist cleaning cloth.
Have any heavily contaminated or damaged diffusers replaced by an ABB Turbocharging
Service Station.
© Copyright 2016 ABB. All rights reserved.
HZTL4033_EN
Page 41 / 113
Revision A
July 2016