ABB HT570418 Operation Manual page 109

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly
Oil orifice plates
An orifice plate for adjusting the oil pressure is fitted in each of the two oil in-
let channels in the bearing casing. When the cartridge group, the bearing
CAUTION
casing or the turbocharger is fitted to the engine, it must be ensured that the
orifice plates that are specified for the turbocharger have been installed in
the two oil inlet channels.
Check correct installation of oil orifice plates.

Remove temporary covers on oil connections.

Fit all oil pipes according to instructions of enginebuilder.

Version with compressor wheel cooling
Fit air supply line (compressor wheel cooling [➙ 5]).

© Copyright 2016 ABB. All rights reserved. HZTL4033_EN
Page 79 / 113
Revision A July 2016