Be sure that the trailer has all necessary lighting and
marking as required by law, and use safety chains.
Disengaging the
Hydrostatic Drive
If you need to push the machine unpowered, you must
release the hydrostatic drive. To release the drive, pull
the hydrostatic-drive bypass lever
(Figure
7) out and
down, locking it in the out position. The front wheels
now rotate freely.
To engage the drive, pull up on the bypass lever until
it snaps back into the machine.
g017940
Figure 7
(Rear of machine shown)
1. Hydrostatic-drive bypass lever
11