Table of Contents
Advertisement
Pull the brake levers to ensure the brakes are working properly
and adjust if necessary.
Visually inspect the bike for damage or anything out of the
ordinary.
Turn on the lights, especially if riding at night.
Make sure all hardware is tightened to the recommended torque
specifications found on p. 21 of the owner's manual.
Verify that the frame folding latch is securely closed and locked.
Verify that the stem folding latch is securely closed and locked.
Check that the handlebar stem is inserted past the minimum
insertion point. The minimum insertion point is labeled near the
bottom of the handlebar stem.
Check that the handlebar stem collar and clamp are closed and
tightened to 6 Nm or till it leaves an impression on your hand.
Check that the seatpost is inserted past the minimum insertion
point. The minimum insertion point is labeled on the seatpost.
Check that the seatpost collar and clamp are closed and
tightened to 18 Nm or till it leaves an impression on your hand.
Check that the seat cannot be twisted out of position, and set
the height to a safe position that makes it easy to mount and
dismount the bike.
Make sure the pedals are locked in a flat position.
Check the condition of the chain to see if it needs cleaning
or lubrication.
Wear a helmet and high visibility clothing.
NEVER exceed the maximum total weight limit of 330 lbs. (150
kg). The rear rack can hold a maximum of 150 lbs. (68 kg). As an
example, if you have 40 lbs. (18 kg) of cargo, then the maximum
weight of the rider would be 290 lbs. (131 kg)
Only carry the cargo you need. More weight will drain the battery
faster and affect how the bike handles.
Ensure all components are properly secured.
Make sure your battery is fully charged.
L E CT R I C E B I K E S.C O M | 602.715.0907
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP 3.0 and is the answer not in the manual?
Questions and answers
How do you turn on the standard headlight and brake light for night riding?
To turn on the standard headlight and brake light on the Lectric XP 3.0 for night riding, first, make sure the bike is powered on by pressing the power button. Once the display is on, hold the "+" button on the handlebar control until the light symbol appears on the display. This indicates that the lights are on. The headlight will provide a forward beam, and the brake light will activate when braking.
This answer is automatically generated
@Jan Hangen Do the keys need to be engaged for the battery to work
how to charge battery
To charge the Lectric eBikes XP 3.0 battery:
1. Plug the charger cable into the battery pack's charging port.
2. Plug the charger power cable into a wall socket using the supplied AC power cord.
3. Ensure the battery is within the permitted charging temperature range.
4. Do not leave the battery unattended while charging.
5. Do not charge the battery for more than 12 hours.
6. When the charger light turns green, disconnect the charger from the battery and then from the wall socket.
7. If the battery was charged while in the bike frame, insert the rubber plug into the charging port to prevent dirt or water from entering.
This answer is automatically generated
Having trouble reconnecting the stem clamp
To reconnect the stem clamp on a Lectric eBikes XP 3.0:
1. Pull the handlebar stem to its upright position.
2. Push the latch in firmly until it locks in position.
3. Pull on the latch to confirm it is locked and the handlebars cannot fold.
This answer is automatically generated
I need a exploded view of the rear breaking system
How to turn on head light
To turn on the headlight on a Lectric eBikes XP 3.0, hold the plus (+) button on the display control pad for about 3 seconds until the light icon appears on the display.
This answer is automatically generated
Didn't receive a manual with my 3.0 long range bike.
You can obtain the owner's manual for the Lectric XP 3.0 eBike online.
This answer is automatically generated
@Larry J Harrison 410 Jackson St. Muscatine, Iowa 52761
@Mr. Anderson
I cannot find the voice associated the video?
How I turn on the voice with the video.
size of rear axle on XP 3.0
ALINE THE FRONT WEAL WITH HANDLE BAR?
To align the front wheel with the handlebars on a Lectric eBikes XP 3.0, follow these steps:
1. Gather the necessary tools: a 5mm Allen socket, a 5mm Allen wrench, and a torque wrench.
2. Locate the two pinch bolts at the bottom of the stem.
3. Use the 5mm Allen wrench to evenly loosen both pinch bolts until the stem is loose enough to adjust.
4. Grip the handlebars and make small adjustments left and right until the display is lined up with the front tire and headlight.
5. Use the front fork to ensure proper alignment between the stem and handlebars.
6. Once aligned, use the 5mm Allen wrench to tighten the pinch bolts.
7. Torque the bolts down to 20 Nm using the torque wrench and 5mm Allen socket.
After completing these steps, the handlebars should be properly aligned, and the eBike is ready to ride.
This answer is automatically generated