ESR# sh mpls ldp neighbor 1.1.1.1
Peer LDP ID: 1.1.1.1; Local LDP ID 4.4.4.4
State: Operational
TCP connection: 1.1.1.1:646 - 4.4.4.4:56668
Messages sent/received: 401/401
Uptime: 02:00:24
Peer holdtime: 55
Keepalive interval: 18
LDP discovery sources:
6.2.1 Algorithm for setting Hello holdtime and Hello interval in the global LDP configuration
Step
Description
1
Configure the LDP (see
2
In the LDP configuration mode, set
Hello holdtime
3
In the LDP configuration mode, set
Hello interval
6.2.2 Algorithm for setting Hello holdtime and Hello interval for address family
Step
Description
1
Configure the LDP (see
2
In the LDP address family
configuration mode, set Hello
holdtime on the specified interface
3
In the LDP address family
configuration mode, set Hello interval
on the specified interface
6.2.3 Algorithm for setting Keepalive holdtime parameter in the global LDP configuration
Step
Description
1
Configure the LDP (see
2
In the LDP configuration mode, set the
Keepalive parameter
Command
section LDP
configuration)
esr(config-ldp)# discovery
hello holdtime <TIME>
esr(config-ldp)# discovery
hello interval <TIME>
Command
section LDP
configuration)
esr(config-ldp-af-ipv4-
if)# discovery hello
holdtime <TIME>
esr(config-ldp-af-ipv4-
if)# discovery hello
interval <TIME>
Command
section LDP
configuration)
esr(config-ldp)# keepalive
<TIME>
ESR service routers. ESR-Series. Functionality description. Version 1.12.0
Keys
<TIME> — Time in seconds in
the range of [3..65535]
Default value:15
<TIME> — Time in seconds in
the range of [3..65535]
Default value: 5
Keys
<TIME> — Time in seconds in
the range of [3..65535]
Default value:15
<TIME> — Time in seconds in
the range of [3..65535]
Default value: 5
Keys
<TIME> — Time in seconds in
the range of [3..65535]
Default value:180
191
Need help?
Do you have a question about the ESR-10 and is the answer not in the manual?
Questions and answers