Initial Settings; Windows Update Settings - Mitsubishi Electric MELIPC MI5A1P User Manual

5.2

Initial Settings

After setup is completed, configure Windows' initial settings as necessary.
After configuring Windows' initial settings, turn OFF the power supply of this product. ( Page 134 Turning OFF or
Resetting This Product)

Windows update settings

To prevent an automatic restart of the Windows part by an automatic update of Windows Update while this product is in
operation (a user is logged into the Windows part), change the following group policy from the Windows default settings.
Group policy
No auto-restart with logged on users for scheduled automatic updates installations
Setting after change
To change the Windows Update settings, use the following procedure.
1.
Starting the Local Group Policy Editor
Start the Local Group Policy Editor using one of the following methods.
• For the file name, input 'gpedit.msc', and then run it
• In Windows search, input 'gpedit.msc', and then run it
• In the command prompt, input 'gpedit.msc', and then run it
2.
Select Windows update settings.
In the left pane of the Local Group Policy Editor, select Windows Update.
[Local Computer Policy][Computer Configuration][Administrative Templates][Windows Components][Windows
Update][No auto-restart with logged on users for scheduled automatic updates installations]
Precautions
To update Windows, stop an automatic restart of the Windows part by selecting "Disable" for "Auto-reset Windows" in the
menu selection mode. (Page 140 Menu Operation Switch)
Settings after change
Enabled
5 Windows SETUP
53
5.2 Initial Settings
5