Table of Contents
Advertisement
BYPASS MODE
When the Bypass code is entered in the Keypad, Relay 1 is set to
deactivated state.
When the Bypass code entered in the Keypad, Relay 2 is set to
deactivated state.
During the Bypass period, multiple people (with or without Tags) are
allowed to walk through the door without any restriction.
Bypass resets the alarm mode.
Bypass is terminated if the door is not opened 5 seconds after the
Bypass code was entered.
Within the Bypass time out period, Bypass is terminated after door is
closed.
After Bypass time out:
In night mode, if the door is opened, the Controller switches to
Alarm mode.
In day mode, if the door is opened and there is TIF, the Controller
switches to Alarm mode.
User and Deployment Guide
30
- Quick Links:
- How It Works
- Ex5700 Controller
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WanderGuard BLUE and is the answer not in the manual?
Questions and answers
How to reprogram the silence code
I need to reset the password in my facility. Unfortunately, I cant find any info on how to
To reset the password (PIN code) for the Stanley Healthcare WanderGuard BLUE system, use the WanderGuard BLUE Manager. The Visitor Code, Bypass Code, and Alarm Reset Note code can all be changed in the WanderGuard BLUE Manager under the Settings section in the Controller Configuration.
This answer is automatically generated