Toshiba Satellite Click 10 Series User Manual page 32

2.
3.
4.
Do not turn the computer or peripheral devices back on immediately. Wait
a short period to avoid any potential damage.
Restarting the computer
Certain conditions require that you reset the computer, for example if:
To restart the computer, there are several ways this can be achieved:
Sleep Mode
If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the computer into Sleep Mode. In this
mode, data is maintained in the main memory of the computer. When you
turn on the power again, you can continue working right where you left off.
Your system supports Connected Standby function, which starts working
after your tablet goes into Sleep Mode. Connected Standby function is to
provide a constant connectivity while delivering long battery life, and at the
same time, some activities are allowed to run to ensure that the supported
Connected Standby scenarios (for example, receiving emails, updating tiles
alive with fresh content, downloading/uploading a file from/to a website,
and playing music) are functioning properly.
When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always shut down the
computer. This includes turning off any wireless communication
User's Manual
Make sure all disk/disc activity has stopped before removing the disk/
disc.
If you turn off the power while a disk (disc) is being accessed, you
might lose data or damage the disk.
Never turn off the power while an application is running. Failure to do
so can cause data loss.
Never turn off the power, disconnect an external storage device, or
remove storage media during data read/write. Failure to do so can
cause data loss.
In the Settings charm, click Power and then select Shut down.
Turn off any peripheral devices connected to your computer.
You change certain computer settings.
In the Settings charm, click Power and then select Restart.
Press CTRL, ALT, and DEL simultaneously (once) to display the
menu window, and then select Restart by clicking the power icon (
in the lower-right corner.
)
2-11