Table of Contents
Advertisement
TD220MAX_manual_v11.doc
Parameter
A) SNMP Read
Community
B) SNMP Write
Community
C) SNMP Trap
Community
D) SNMP v3 Auth
Password
E) SNMP v3 Priv
Password
F) SNMP Mode
G) Trap Version
H) Auth Trap Enable
I) SNMP v3 Password
Mode
J) SNMP Trap Manager
#1
05-6906A01
R/W
Description
R/W
SNMP community string used for SNMPv1/SNMPv2c read access.
This string can be up to 30 alphanumeric characters.
R/W
SNMP community string used for SNMPv1/SNMPv2c write access.
This string can be up to 30 alphanumeric characters.
R/W
SNMP community string used for SNMPv1/SNMPv2c trap access.
This string can be up to 30 alphanumeric characters.
R/W
Authentication password stored in flash. Will be used when Agent
is managing passwords locally or initially for all cases on reboot.
This is the SNMPv3 password used for Authentication (currently
only MD5 is supported). This string can be up to 30 alphanumeric
characters.
R/W
Privacy password stored in flash. Will be used when Agent is
managing passwords locally or initially for all cases on reboot.
This is the SNMPv3 password used for Privacy (DES encryption).
This string can be between 8 and 30 alphanumeric characters.
R/W
This specifies the mode of operation of the SNMP Agent. Choices
are disabled, v1_only, v2_only, v3_only, v1-v2, and v1-v2-v3. If the
mode is disabled, then the Agent will not respond to any SNMP
traffic. If the mode is v1_only, v2_only, or v3_only, then the Agent
will only respond to that version of SNMP traffic. If the mode is v1-
v2, or v1-v2-v3, then the Agent will respond to the specified
version of SNMP traffic. The default mode is v1-v2-v3 (trilingual).
R/W
This specifies what version of SNMP will be used to encode the
outgoing traps. The different versions of SNMP will include
different information in the traps. The choices are v1_traps,
v2_trap, and v3_traps. When v3_traps are selected, v2-style traps
will be sent but with a v3 header.
R/W
Indicates whether or not traps will be generated for login events.
R/W
Determines whether v3 passwords are managed locally or via an
SNMP Manager. The different behaviors of the Agent depending
on the mode specified here are described above.
R/W
Specifies an SNMP Manager on the network that traps will be sent
to.
Page 29 of 49
7/31/2014
Advertisement
Table of Contents
