Warning Plates On The Turbocharger; Fig. 3: Warning Plate Locations - ABB HT600348 Operation Manual

Table of Contents

Advertisement

Operation Manual / 4 Product description / A130-H.. - A140-H
1 Introduction / 1.5 Warning plates on the turbocharger
1.5

Warning plates on the turbocharger

Warning plates are affixed at the following locations:
Fig. 3: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates from ABB Turbocharging Service Stations.
u
Remove any warning plates that have become unreadable.
u
Clean and degrease the areas designated for the warning plates.
u
Fit new warning plates and remove protective sheets.
u
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2020 ABB. All rights reserved.
HZTL4030_EN
Rev.F
February 2020

Advertisement

Table of Contents
loading

This manual is also suitable for:

A135-h66

Table of Contents