Vivo DESK-E-200W Instruction Manual
  1. Manuals
  2. Brands
  3. Vivo Manuals
  4. Indoor Furnishing
  5. DESK-E-200W
  6. Instruction manual
Vivo DESK-E-200W Instruction Manual

Vivo DESK-E-200W Instruction Manual

White electric dual motor desk frame
Hide thumbs Also See for DESK-E-200W:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

White Electric Dual Motor Desk Frame
Instruction Manual
SKU: DESK-E-200W
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-e-200b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DESK-E-200W and is the answer not in the manual?

Questions and answers

Related Manuals for Vivo DESK-E-200W

Summary of Contents for Vivo DESK-E-200W

  • Page 1 White Electric Dual Motor Desk Frame Instruction Manual SKU: DESK-E-200W Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-e-200b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...

  • Page 2: Electrical Safety Instructions

    WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury.

  • Page 3: Tools Needed

    TOOLS NEEDED Phillips Screwdriver Drill ASSEMBLY STEPS STEP 1 Slide Inner Crossbars (3) into Outer Crossbars (4, 5). Tighten set screws in Outer Crossbars (4, 5) lightly using 4mm Allen Wrench (G), but do not completely tighten at this time. Assemble Side Brackets (6) to the ends of Outer Crossbars (4, 5) using M6x15 bolts (A), making sure brackets are on the top of the crossbars, and tighten with 4mm Allen Wrench (G).
  • Page 4 STEP 2 Assemble Motorized Legs (2) to the frame assembly using M6x20 Screws (B) and tighten with 4mm Allen Wrench (G). STEP 3 Mount Feet (1) to Motorized Legs (2) using M6x30 Screws (C) and tighten with 4mm Allen Wrench (G). 4x 4...
  • Page 5 STEP 4 Place the frame assembly upside down on the desktop with Adapter Support Bracket (7) in place between the crossbar and desktop. Using 4mm Allen Wrench (G), loosen the set screws on the crossbars, adjust the frame length to fit the desktop, then retighten the set screws.
  • Page 6 STEP 6 Connect Motorized Legs (2), Control Panel (10) and AC Adapter (8) to Control Unit (9), using Extension Cable (11) to connect the second leg. Connect Power Cable (12) to AC Adapter. Organize cables using Cable Clips (E). Cable Clips (E) have adhesive pads, but may be secured using ST4.2x10 Screws (D) if desired.
  • Page 7 CAUTION! Do not exceed desk Keep area of vertical Keep weight on desk Leave enough slack in weight limit. motion free of balanced for correct cables to allow for full obstacles. operation and longer range of vertical motion. life of components. Failure to follow these instructions may result in property damage and/or personal injury.
  • Page 8 AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents