9
Checking After Commissioning
Check Item
The controller has exited from the diagnostic mode.
The temperature and humidity are correctly set.
10
Power-Off
1. Tap Shutdown on the LCD home screen.
2. Turn off all switches on the smart cooling product.
3. If the smart cooling product will not be used over a long
time, drain the water in the heat exchanger or take
antifreeze measures to avoid frost cracks.
Appendix 1: Precautions Against Adding Glycol
For details about adding glycol, refer to the
Cooling Product User Manual
To prevent glycol solution from corroding pipes and the heat exchanging coil, corrosion inhibitor
should be mixed into the glycol solution. For details about the mixing schemes, consult glycol
experts.
FusionCol8000-C210 In-room Chilled Water Smart
.
17
Result
□ Passed □ Failed
□ Passed □ Failed
The password protection
function during startup and
shutdown has been added.
Perform operations as required.