Chapter 5. Configure Advanced Settings; Uefi/Bios; What Is Uefi/Bios Setup Utility; Start The Uefi/Bios Setup Utility - Lenovo 100e Windows 2nd Gen User Manual

Chapter 5. Configure advanced settings

This chapter provides information about UEFI/BIOS and system recovery.

UEFI/BIOS

This section introduces what is UEFI/BIOS and the operations you can perform in UEFI/BIOS.

What is UEFI/BIOS setup utility

UEFI/BIOS is the first program that the computer runs when the computer is turned on. UEFI/BIOS initializes
the hardware components and loads the operating system and other programs. Your computer may include
a setup program (setup utility) with which you can change UEFI/BIOS settings.

Start the UEFI/BIOS setup utility

1. Turn on or restart the computer.
2. Press F2 repeatedly when the Lenovo logo appears on the screen.
Note: For computers with hotkey mode enabled, press Fn + F2.

Navigate in the UEFI/BIOS interface

You can navigate in the UEFI/BIOS interface by pressing the following keys:
Fn+F1 Display the General Help screen.
Fn+F9 Restore to the default settings.
Fn+F10 Save your configuration and exit.
Fn+F5
Change to a lower value.
Fn+F6 Change to a higher value.
↑↓ Locate an item.
← → Select a tab.
Esc Exit the submenu and return to the parent menu.
Enter Enter the selected tab or submenu.

Change the startup sequence

1. Start the UEFI/BIOS setup utility.
2. Select Boot. The default device order list displays.
Note: The Boot menu displays if the computer cannot start from any devices or the operating system
cannot be found.
3. Set the startup sequence as desired.
4. Press Fn+F10 to save the changes and restart the computer.
To change the startup sequence temporarily:
1. Restart the computer. Press F12 repeatedly when the Lenovo logo appears on the screen.
© Copyright Lenovo 2018
29