Installation Checkout - Kohler TROCADERO Installation Instructions Manual

Supply Stops: Carefully bend supply tubes to align with
supply stops. Slide a coupling nut first, then a ferrule, onto
each supply tube. Insert supply tubes into supply stop
outlets. Tighten all coupling nuts.

5. INSTALLATION CHECKOUT

Ensure all coupling nuts are tight.
Open drain.
Turn on main water supply and check for leaks. Repair as
required.
Lift and turn lever handle to run hot and cold water through
spout for about a minute to remove any debris. Check for
leaks at this time. Shut off faucet.
A
1032343-2-
Supply Stop
6
Supply Tube
Coupling Nut
Ferrule
Fig. #10
Fig. #11
Kohler Co.