Toshiba Perfecptione Installation And Maintenance Manual page 202

PROGRAMMINGPROCEDURES
SECTION 200-255-310
FEBRUARY1992
When entering PAR in response to TYPE (Table
10.2), the next prompt will be:
HAC (Home Area
Code)--Defines the area code
in which the system is operating. Home area
codes are also used to analyze a dialed number
that does not contain an area code, Data that is
entered here will appear in the Least Cost Rout-
ing Data Block
(DLCl Program,
PAR table, HAC
prompt).
Enter: Area Code NO/IX.
NOTE:
N=2 -9, O/l=OorI, X=0 -9.
ICC (Interchangeable Codes)-A
"Y" informs the
system that interchangeable codes are used.
Interchangeable codes are office codes that
have 0 or 1 as the second digit (NO/IX format).
Area codes will be identified as the three digits
following the DDD prefix. Office codes will be
identified as the first three digits when a DDD
prefix is not dialed (see DDP prompt).
Enter: Y or N.
SPCCl (Specialized Common Carrier #1)-h-t-
forms the system of the DN that is to be used to
access an SPCC (MCI, Sprint, etc.) or equal
access carrier (10XxX). The system will recog-
nize the DN and ignore it for Toll Restriction
purposes. Data that is entered here will also
appear in the
DMDR Program .
Enter: NXXXXXX (SPCC Number) or
10XxX (Equal Access Number) or
NONE.
SPCC2 (Specialized Common Carrier#2)-Same
as SPCCl, but for a second carrier.
Enter: NXXXXXX (SPCC Number) or
10XxX (Equal Access Number) or
NONE.
DDP (Direct Distance Dialing Prefix)--Defines
the
Direct Distance Dialing (DDD) prefix in the Num-
bering Plan Area (NPA). If ICC is "Y," then NO/l X
and NXX become interchangeable, enabling area
codes and office codes to have 0 or 1 as their
second digit. In this case, the DDP is used to
differentiate between the two code types (see
example). If the ICC response is "N," then calls
will be made using the normal NPA formula of
NO/lx and NNX.
Enter: 1,2, or 3 digits or NONE.
Example: If ICC is 'Y" and the DDP is pro-
grammed as 1, then the dialed number 209-
1234 is recognized as a call within the home
area code, while the dialed number l-209-555
1234 is recognized as a call outside the home
area code. If ICC is 'IN," this dialing plan-js not
used.
NOTE:
If a DDD prefix is used in the NPA, it must be
entered here even if To//
Restriction is not
used.
&JTHl (Authorization Code
#l)-Indicates the
number of digits in the authorization code to be
used with SPCCl . These digits and the SPCCl
DN that is entered will be ignored forToll Restric-
tion purposes.
Enter: 1 - 12 or NONE.
NOTE:
When using equalaccess (10XxX) forSPCC1
orSPCC2, do not enteran authorization code.
AUTHP (Authorization Code
#2)-Same as
AUTHl, but for SPCC2.
Enter: 1 - 12 or NONE.
NOTE:
The SPCC and AUTH entries will not appear
in the SMDR output.
IO-2