Use Of Sterile Puncture Adapter (Ezu-Pa5V) - Hitachi C41V Instruction Manual

3.2

Use of Sterile Puncture Adapter (EZU-PA5V)

The process of attaching the Sterile Puncture Adapter (EZU-PA5V) to
the probe is as follows. If the Sterile Puncture Adapter is used, careful
handling is necessary to avoid damage of the probe cover. During open
or minimal invasive surgery, use the protection sleeve to cover probe
and cable.
1) Attach a sterile probe cover to the probe. (See "3.1 Connection and
Settings")
2) Put the picks of the Sterile Puncture Adapter to the grooves on the
tip of the probe. (See Fig. 6.)
3) Push the other end of the Sterile Puncture Adapter until fix the
dents of the Sterile Puncture Adapter to the projection on the probe.
(See Fig. 7.)
Sterile Puncture Adapter (EZU-PA5V)
Fig. 6
Probe cover
Fig. 7
-8- Q1E-EP1363