Husqvarna QHIG650P User Manual page 32

32 www.husqvarna-electrolux.se
5.4 Using the cooking zones
Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically.
5.5 Automatic Heat Up
Activate this function to get a desired
heat setting in a shorter time. When it is
on, the zone operates on the highest
setting in the beginning and then
continues to cook at the desired heating
setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
Immediately touch a desired heat setting.
After 3 seconds
To deactivate the function: change the
heat setting.
5.6 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical data"
chapter.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
heat setting.
5.7 Fry Assist
This function lets you set a heat setting
level to fry your food. The hob keeps the
selected temperature automatically while
frying. Once the heat setting level is set,
no manual temperature adjustment is
necessary.
( comes on).
comes on.
. comes on.
You can set the function for
the left front cooking zone of
the hob.
CAUTION!
Use laminated pans only
with low heat setting level to
prevent overheating and
damage of the cookware.
To activate the function:
1. Put an empty pan on the left front
cooking zone. Do not use a lid while
using the function.
2. Press . The indicator above the
symbol comes on. The heat setting is
set to .
3. Set the best heat setting for the food
you want to fry. Refer to the table in
Hints and tips chapter. The indicators
above the symbol start to flash
slowly. The zone is heating up.
4. Wait until the pan reaches the
temperature you set. A signal
sounds. All indicators above the
symbol are on.
5. Put the food and some fat on the
pan.
To deactivate the function:
Touch 0 of the left front cooking zone or
touch .
5.8 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time: set the
cooking zone with
of
. The indicator of