Fig. 35: Removing Cartridge Group 2 - ABB HT579397 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.6 Removing the cartridge group
CAUTION
Clearance between blade tip and casing
Serious damage to machinery or property can result from the rubbing or
jamming of the blade tips on the casing.
Check that the blades do not rub on the turbine diffuser during disas-
u
sembly/assembly by rotating the rotor.
Fig. 35: Removing cartridge group 2
1. Evenly press off cartridge group by screwing three press-off screws (90900) into the
designated holes.
2. Using two guide rods (90490), move out cartridge group.
3. Fit supports (90450) and put down cartridge group.
© Copyright 2017 ABB. All rights reserved. HZTL4033_DE Revision B December 2017