Monitoring During Operation; Oil Pressure, Oil Temperature; Fig. 17: Lubricating Oil Pressure Measuring Point; Table 5: Oil Pressure Range - ABB HT579397 Operation Manual

Operation Manual / 4 Product description / A100-M axial
4 Monitoring during operation / 4.1 Oil pressure, oil temperature
4

Monitoring during operation

4.1

Oil pressure, oil temperature

Lubricating oil pressure
CAUTION
Assuring lubricating oil pressure
Serious damage to engine or property can result from missing or insuffi-
cient lubricating oil supply.
The lubricating oil pressure must be monitored during operation and the
u
necessary pressure assured at the oil inlet.
For monitoring the lubricating oil pressure, ABB Turbo Systems recommends installing a
manometer "M". If the pressure is controlled electronically, the appropriate signals are to be
triggered at the warning and alarm values.
Fig. 17: Lubricating oil pressure measuring point
The permitted oil pressure ranges at measuring point M of the turbocharger are listed be-
low.
Status for operation
Normal operation
Engine start: Cold oil, admissible for max. 15 minutes
Pre-lubrication
Post-lubrication
Long-term lubrication
Warning signal: Temporarily admissible (<1 h )
Alarm signal: Not permissible. Stop the engine immediately
Table 5: Oil pressure range
Lubricating oil temperature at the inlet
CAUTION
Machine damage
If the oil temperature at the oil inlet exceeds the admissible range, this may
lead to engine damage.
Observe oil temperature at the oil inlet according to the following table.
u
© Copyright 2017 ABB. All rights reserved.
Pressure at measuring point M
HZTL4033_DE
P [bar]
oil, in
1.3 ... 2.5
1.3 ... 5.0
1.3 ... 2.5
1.3 ... 2.5
0.2 ... 0.5
1.0 ... 1.3
< 1.0
Revision B December 2017