DeWalt DCE531N Manual page 33

2016 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Trigger switch
1
Lock-off button
2
Housing (power unit)
3
Vibrator head
4
Flex shaft casing
5
Collar
6
Flex shaft core (not shown; inside casing)
7
Battery
8
Battery release button
9
Spindle
10
Flange
11
Intended Use
Your concrete vibrator has been designed for professional
concrete consolidation and compacting applications.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This concrete vibrator is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
e
Inserting and Removing the Battery Pack
from the Tool (Fig. C)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Tool
Handle
1. Align the battery pack with the rails inside the tool's
8
handle (Fig. C).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap into place.
WALT battery packs and chargers.
is fully charged.
8
To Remove the Battery Pack from the Tool
1. Press the release button 9
out of the tool handle.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D WALT battery packs include a fuel gauge which
e
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge
button . A combination of the three green LED lights will
13
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to be recharged.
nOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
Attaching the Shaft (Fig. D, E)
1. Ensure that the plastic collar
casing 5 as shown in Figure D.
2. Insert the spindle into the flex shaft opening.
10
3. Manoeuvre the flex shaft back and forth until the parts slide
together (Fig. E).
4. Ensure that the flex shaft flange
5. Firmly tighten the collar by hand (Fig. E). Do not use a
wrench to tighten.
OPERATION
Instructions for Use

WARNING: Always observe the safety instructions and
applicable regulations.

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Proper Hand Position (Fig. F)

WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.

WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the handle
the other hand on the main body housing
Trigger Switch (Fig. A)
To turn the tool "ON", depress the trigger switch
vibration intensity is variable depending upon how far the
trigger is depressed. To turn the tool "OFF" release the trigger
switch.
EngLIsh
and firmly pull the battery pack
6 is inserted over the flex shaft
is snug against tool.
11
14 , with
3 .
1 . The
31