Instructions (Cont.)
b. Single shot volume (default - 40 mL) (see Fig. 13): press the MENU
button until "1" is visible under the cup section on the right. Press the
SHOT button and turn the START/STOP knob to choose between 30, 35,
40, 45 and 50 mL.
c. Double shot volume (default - 80 mL): repeatedly press the MENU
button until "2" is visible under the cup section on the right. Press the
SHOT button and turn the START/STOP knob to choose between 70, 75,
80, 85 and 90 mL.
Press the CUPS button to quickly switch between the single and double shot.
Fig. 13
14. Pull the espresso. Press the START button. The pump will sound. The spouts
will stream thick, rich espresso.
15. Enjoy! Your espresso is now ready for your enjoyment. Be careful when
drinking it as it will be hot. If you want to make a coffee with milk, like a
cappuccino, please refer to pages 22-24 for milk-frothing instructions.
16. Remove the portafilter. Holding the portafilter by its plastic handle, slowly
turn it to the left and move it carefully out from under the group head.
CAUTION!
with utmost care. Only hold it by its plastic handle, and take particular care
when adding coffee and wiping the rim.
17. Remove the espresso puck. Gently tap the side of the portafilter against a
vertical surface, or against the knock bar in a specially designed coffee grounds
bin, to discard the used espresso puck.
AFTER SALES SUPPORT
20
The portafilter is hot after preheating and during use. Handle it
1300 112 534
AUS
MODEL: STR-E15BGD PRODUCT CODE: 708548 10/2022
tempo.org/support
Need help?
Do you have a question about the STR-E15BDG and is the answer not in the manual?
Questions and answers
I've followed the instructions to factory reset my coffee machine as outlined in the manual - however the buttons just keep flashing and I'm unable to get it to turn back on normally.