Kemppi Master M 358 Operating Manual page 43

3. If a memory channel has been already linked to the weld pass, you can activate the selected weld pass and the
default memory channel by selecting 'Activate'.
4. If a memory channel has not been linked to the weld pass previously, you can link the weld pass to an existing
memory channel ('Select linked channel').
A memory channel can also be linked to a weld pass on a dWPS through the Memory channels view by selecting
'Link to WPS' in the memory channel's actions menu.
Once a weld pass on a dWPS is activated, the default memory channel linked to it is automatically selected. This is indic-
ated also in the home view and on screen during welding.
The welding parameters are still manually adjustable, but the adjustment ranges defined on the active WPS are indic-
ated on the screen. If you adjust the welding parameters outside the WPS adjustment range, the control panel shows a
warning on the screen:
The active WPS can be deactivated by selecting 'Stop using' in the WPS's weld pass actions menu.
More feature descriptions here:
>> "Digital Welding Procedure Specification (dWPS)" on page 62
>> "WeldEye ArcVision" on page 62
© Kemppi
43
Master M 358
Operating manual - EN
1921980 / 2240