Table of Contents
Advertisement
66/80
CytroPac | Decommissioning
Overall machinery/
system
Bosch Rexroth AG, Edition 07.2022, RE 51055-B
11 Decommissioning
11�1 Preparing for decommissioning
▶ Provide collecting containers that are large enough to accommodate the total
hydraulic fluid volume.
The total volume of the hydraulic system comprises the volumes of the oil tank,
the line system, the drives, etc.
▶ Always observe applicable instructions for the overall machinery/system.
▶ Unless these operating instructions provide different information,
proceed as follows:
– Prevent any hazards due to machinery in the vicinity.
– Unauthorized personnel must not be allowed access to the working area.
– Lower and securely support all loads.
11�2 Decommissioning the system
▶ Switch off the power supply and secure the system against restarting.
▶ Switch off the hydraulic pressure supply and secure it.
▶ Make sure that all relevant system parts are depressurized and de-energized.
▶ Using the clip, pull the hydraulic fluid drain hose, see Fig. 1, item 10,
and discharge the hydraulic fluid into the provided collecting tank.
Ensure that the lines and consumers are completely emptied. If necessary,
carry out bleeding measures.
▶ Treat cooling water connections with a suitable corrosion protection agent.
Decommission the overall machinery/system as described in the overall
machinery/system operating instructions.
Advertisement
Table of Contents
