Table of Contents
Advertisement
14/80
CytroPac | Safety instructions
Bosch Rexroth AG, Edition 07.2022, RE 51055-B
Loud noise due to high sound pressure level (in case of malfunction)!
Danger of hearing damage (temporary/permanent), stress/loss of attention!
Fault in voice communication and acoustic signals!
▶ Wear your ear protection.
▶ Consult the machine manufacturer or Bosch Rexroth to identify any
malfunction if applicable.
2�7 Personal protective equipment
During operation and maintenance work as well as during installation and removal
of the hydraulic power unit, always wear the following personal protective
equipment:
• Heat or cold-resistant protective gloves
• Ear protection
• Safety shoes
• Perfectly fitting safety goggles
• Protective helmet
2�8 Obligations of the machine end-user
In order to ensure safety when handling the hydraulic power unit and its
components, the machine end-user of the system must:
• guarantee the intended use of the hydraulic power unit and its components
according to chapter 2.2 "Intended use".
• instruct the operating personnel regularly in all items of the operating
instructions and make sure that they are observed.
• ensure compliance with the instructions on occupational safety and with the
operating instructions.
• ensure compliance with operating data (admissible operating temperature,
maximum operating pressure).
The machine end-user of the Bosch Rexroth hydraulic power unit is obliged to
provide personnel training on a regular basis regarding the following subjects:
• Observation and use of the operating instructions and the legal regulations
• Intended operation of the Bosch Rexroth product
• Observation of the instructions of factory security officers and of the operating
instructions of the machine end-user
• Behavior in case of emergency
The operation of installations, systems and machines basically requires the
implementation of a holistic IT security concept which is state-of-the-art in terms
of technology. Accordingly, Bosch Rexroth products and their properties have to be
considered as components of installations, systems and machines for their holistic
IT security concept.
Unless otherwise documented, Bosch Rexroth products are designed for operation
in local, physically and logically secured networks with access restrictions for
authorized persons, and they are not classified according to IEC 62443-4-2.
CAUTION
Advertisement
Table of Contents
