Specifications; Precautions For Use - Kenwood PWR 18-2 Instruction Manual

3. SPECIFICATIONS

Data transmis-
9 6 0 0 b i t / s e c ,
sion speed
Data code start bit
structure data bit
parity bit
stop bit
Parity method even parity
Max. length of
1.5 m
control cord
Max. number of
controllable
4 units
machines
single-pass NRZ
Signal method
4
error w i t h i n 5 %
1 bit
7 bit
1 bit
1 bit
0 : 5 V
1:0 V

4. PRECAUTIONS FOR USE

Please keep the following in mind when reading this
manual. This manual w a s written for use with all four
models of the PWR Series. However, since there may be
commands that do not apply to the particular PWR Ser-
ies model you are using, check the entry to the right of
each command to confirm for which models the com-
mand is applicable.
Model name
PWR 18-2
PWR 3 6 - 1
PWR 1 8 - 1 T
PWR 1 8 - 1 . 8 0 .
* When connecting the machine to control units such as com-
puters, or when interconnecting multiple units of the machine
with each other, use only the connecting cords provided.
* Since the temperature of the heat sink can become quite
high depending upon the machine's state of operation, do
not allow the provided connecting cords to come in contact
with the heat sink.
* When connecting multiple machines, erroneous connection
of the R E M O T E IN terminal with the machine's IN terminal
can be a cause of machine breakdown. Be sure to connect
only IN and O U T terminals to each other.
Abbreviation
(18-2)
(36-1)
(18-T)
(18-Q)