Advertisement
4
Cover the rest of the cabling in a conduit or with
protective waterproof rubber tape. Make a drip loop
as shown below to create an artificial lowest point of
the cable.
使用防护皮管或者防水胶带，包住线缆其他部分，并制作
滴水弯。滴水弯呈倒 Ω 型，形成线缆的最低点。
Protective hose covering or waterproof tape
防护皮管或者防水胶带
Drip loop
滴水弯
Data Plan/ 数据规划
IP Address/IP 地址
Setting
Description
参数名
参数解释
• Automatic: The IP address, subnet mask, gateway IP address, and DNS are all configured
IP address
automatically.
assignment
自动获取IP地址：系统将自动配置IP地址、子网掩码、网关地址和DNS。
method
• Manual: The IP address, subnet mask, gateway IP address, and DNS must be configured manually.
获取IP方式
使用下面的IP地址：需要用户手动配置IP地址、子网掩码、网关地址和DNS。
• IP addresses starting with 127 are not valid. You must enter an IP address starting with another value
from 1 to 223.
IP address
以127开头的IP地址无效，请输入介于1和223之间的其它数值。
IP地址
• If the camera is passively registered with the platform using ONVIF or SDK, only the IP address needs
to be configured.
通过ONVIF或SDK被动注册时，仅需要配置IP地址即可。
GB/T 28181
Setting
Description
参数名
参数解释
Platform IP
IP address of the platform server. This setting is mandatory.
平台IP
监控平台所在服务器的IP地址。必须设置。
Port number
Port number of the platform server. This setting is mandatory.
端口号
监控平台所在服务器的端口号。必须设置。
Unique ID that the video surveillance platform assigns to the camera. The value of this parameter
must be the same as the first 20 digits in the device ID (the value of Code on the IVS platform)
Device ID
configured on the video surveillance platform. If they are different, the camera will be unable to
设备ID
connect to the video surveillance platform.
监控平台分配给前端设备的唯一标识。必须与平台配置的设备ID（在IVS平台中，该参数名为编码）的前20位保
持一致，以免造成对接失败。
User name used to register the camera with the video surveillance platform. The value of this
Login name
parameter is in the login_name@domain_name format. The login name indicates the device ID. The
登录名
domain name consists of 10 digits.
用于注册到监控平台。格式为：登录名@域名。登录名为设备ID，域名为自定义10位数字。
Password used to register the camera with the video surveillance platform. This password must be the
Password
same as the registration password configured on the video surveillance platform.
密码
设备注册到平台时的注册密码。必须和监控平台中的注册密码保持一致。
Server code
The 20-digit server code complies with the GB/T 28181 protocol.
服务器编码
GB/T 28181服务器编码。自定义输入20位数字。
NOTE/ 说明
•
Waterproof and insulate all cables including power
cables, network cables, and unused pigtails.
电源线、网线等所有的线缆，包括未使用的尾线都需要
做防水绝缘处理。
•
Before that, check the cabling and ensure that the
camera runs normally to avoid reworkings.
做绝缘防水处理前请检查线缆是否接好并可正常工作，
避免二次返工。
•
The waterproof tape must cover the cable bundle
from the insulation sheath all the way to the cable
conduit (for example, a PVC tube). The tape must
be wrapped tightly and there must be no gaps in
the coverage or water will leak in.
防水胶带务必从线缆束绝缘外皮开始缠绕至防护皮管
（如PVC管），且尽量缠紧，且覆盖到位，以免漏水。
Web Operations/Web 操作
Web Client Login/ 登录 Web 客户端
1
Open Internet Explorer, enter the SDC IP address, and press Enter. The IP address can be set automatically via
DHCP, or a static IP address can be used (default: 192.168.0.120).
在Internet Explorer地址栏里输入摄像机的IP地址，IP地址默认通过DHCP自动获取，也可以手动进行设置（默认为
192.168.0.120），按"Enter"键。
NOTE/ 说明
• Supported browsers: Internet Explorer 10-11, Google Chrome 38 and later versions, and Mozilla Firefox
35-51. Google Chrome 45 and later versions require installation of Internet Explorer Tab plug-in.
支持的浏览器：Internet Explorer 10/11、Google Chrome 38及以上版本、Mozilla Firefox 35~51版本。其
中Google Chrome 45及版本以上需要安装Internet Explorer tab插件。
• When using HTTPS to access a camera, you must enable TLS 1.1 or TLS 1.2. Otherwise, the camera web
page cannot be displayed.
使用HTTPS协议访问摄像机时需要启用TLS 1.1或TLS 1.2，否则无法打开摄像机web页面。
• Please open the web browser on your PC as the administrator.
请使用PC的管理员身份打开浏览器。
Enter the user name (admin) and password. For the first login, set the password as prompted.
2
输入用户名admin和密码。首次登录，请按照提示设置密码。
Click Login.
3
单击"登录"。
Network Settings/ 配置基本网络参数
1
Log in to the web client as the admin.
以管理员 admin 登录 Web 客户端。
2
Choose Settings > Network.
选择"高级配置 > 网络"。
3
Set the network parameters based on your network plan.
根据规划的数据配置基本网络参数。
For details about the network settings, see
基本网络参数的具体配置方式请参见《配置指南》。
Platform Connection Settings/ 配置平台对接参数
Log in to the web client as the admin.
1
以管理员 admin 登录 Web 客户端。
Choose Settings > Network > Platform Connection.
2
选择"高级配置 > 网络 > 平台对接参数"。
Set the platform connection parameters based on your network plan.
3
根据规划的数据配置平台对接参数。
For details about the platform connection setting, see Configuration
平台对接参数的具体配置方式请参见《配置指南》。
NOTE/ 说明
• The default coding protocol of cameras is H.265. Verify that the connected surveillance platform
supports H.265. Otherwise, see the
摄像机出厂默认编码协议为H.265，请务必确认所对接的监控平台是否支持H.265编码协议，否则请参见《配置
指南》修改摄像机编码协议。
4
Configuration
Guide.
Guide.
Configuration Guide
to modify the coding protocol of SDC.
Advertisement
