Fujitsu BACnet UTY-VBGX Instruction Manual page 86

BACnet ® Gateway for VRF System
Connect to PC (Configuration tool)
This action allows the user to have access to configuration and monitoring of the device. Two methods to connect to
the PC can be used:
• Ethernet: Using the ETH port of the gateway. How to check connectivity is explained in section 6.3.
• USB cable: To connect the device to the PC the USB cable supplied should be plugged to the USB Console
port.
Copyright© 2010-2017 Fujitsu General Limited - All rights reserved
INSTRUCTION MANUAL r1.3.2 eng
86/103