Dover Markem-Imaje 1050 Instruction Manual page 5

Safety
■ Handling
1050 controller weight: 9,07 kg (20 lb)
1200 controller weight: 10,66 kg (24 lb)
Ensure that lifting rules are followed when handling the equipment by
hand or use appropriate mechanical handling facilities.
If moving a printhead that contains consumables, avoid vibrations.
■ Installation
The printer must be installed in accordance with applicable
requirements. Installation must be performed by a Markem-Imaje
technician. Any person modifying the installation shall be wholly liable
for such modifications.
The printhead must be secured firmly in place with fastening devices.
The printer must be installed in a ventilated location, away from any
source of heat, flames, or sparks.
The printer installation on the production line must not generate any risks
for staff. The printer must not be integrated on a moving system.
The operator's work station must face the printhead.
The printer must be connected to a single phase mains electricity network
with earth ground, using the cable supplied with the printer. The standard
plug on this cable must be easily accessible.
The electrical and pneumatic installations upline of the printer must
comply with applicable regulations. Printer electrical characteristics: see
manufacturer's plate on the controller.
For information on fastening a Markem-Imaje accessory, refer to the
assembly instructions delivered with it.
The Model 1050 and Model 1200 have been designed and tested
to withstand electrical noise found in industrial environments. In
environments exhibiting extreme electrical conditions, additional
protection such as line filtering or an uninterruptible power supply are
required. In such environments, it is the end user's responsibility to make
necessary corrections.
Instruction manual
5