SUN2000-(100KTL, 110KTL, 115KTL)-M2
User Manual
Figure 5-9 Select the crimping module
(A) Crimping module for multi-core cables
----End
Follow-up Procedure
Use scissors to cut off the joints of the rubber rings to remove them. All rubber
rings are removed in the same way.
Remove the corresponding rubber rings in strict accordance with the cable
diameter, and ensure that the crimping module is not damaged. Otherwise the
protection level of the solar inverter will be affected.
Figure 5-10 Remove the rubber ring
Issue 02 (2022-06-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(B) Crimping module for single-core cables
46