Advertisement
Quick Links
Instruction for installation and use
Water Meters DN15 and DN20
1.1
2.1
2.2
2.4
2.6
2.7
Extract of EC CONFORMITY DECLARATION according to procedure of conformity assessment module H1
Manufacturer
We, ITRON Italia S.p.A.
located in Strada Valcossera
16 14100 ASTI Italy,
certify the described
measuring instruments are
conform to Directive 2014/32/
UE of the 26 of February 2014
Available document on www.itron.com
(*) Last revision available on LNE web site
Approval only concerns water meter; Accessories such us non-return valve, communication module, union or connector sealing that can be delivered with
the water meter are not part of the approval.
INSTALLATION
2.3
2.5
2.8
Directive 2014/32/UE
Equipment Description
Unimag/Narval Cyble - Unimag PE type TU4
Medis Cyble type TU5
Unimag+/Narval+/Medis+/Unimag+ PE type TU6 LNE 33564
Flodis DN 15mm type TU1M15
Flodis DN 20mm type TU1M20
MSD Cyble / Multimag Cyble type TMII
1.2
2.9
Approval
Number (*)
LNE 27129
LNE 15008
LNE 19130
LNE 19864
LNE 17401
Procedure of conformity
assessment
www.itron.com/CETU4
www.itron.com/CEMedis
www.itron.com/CETU6
www.itron.com/CEFlodis15
www.itron.com/CEFlodis20
www.itron.com/CEMSDMC
Advertisement
Related Manuals for ITRON DN15
Summary of Contents for ITRON DN15
- Page 1 Instruction for installation and use Water Meters DN15 and DN20 Directive 2014/32/UE Extract of EC CONFORMITY DECLARATION according to procedure of conformity assessment module H1 Approval Procedure of conformity Manufacturer Equipment Description Number (*) assessment Unimag/Narval Cyble - Unimag PE type TU4 LNE 27129 www.itron.com/CETU4...
- Page 2 1 - POSITIONING 1.1 Depending on the model, the meter can be installed in different positions. The corresponding metrological accuracy is specified on the meter cap markings. The meter must always be installed at a low point of the pipe work. 1.2 The meter must not be oriented upside down or with an angle higher than 90°...
- Page 3 1 - EINBAUPOSITION 1.1 Zählereinbau in Abhängigkeit zum Zählermodell und Variante in unterschiedlichen Einbaupositionen möglich. Entsprechende metrologische Angaben sind auf dem Typenschild vermerkt. Zähler immer in einer niedrigen Position im Leitungsnetz einbauen. 1.2 Die Zähler dürfen nicht über Kopf oder mit einem Winkel von mehr als 90° zur Horizontalen installiert werden 2 -EINBAUHINWEISE 2.1 Vor Einbau des Zählers Rohrleitung unter Verwendung eines Distanzrohrs spülen und anschließend entleeren (bei Bedarf Spülvorgang über längeren Zeitraum durchführen)
- Page 4 To learn more visit itron.com While Itron strives to make the content of its marketing materials as timely and accurate as possible, Itron makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of, and expressly disclaims liability for errors and omissions in, such materials. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, and fitness for a particular purpose, is given with respect to the content of these marketing materials.
Need help?
Do you have a question about the DN15 and is the answer not in the manual?
Questions and answers