Printing A Network Connection Report - Epson WF-2930 User Manual
Hide thumbs
Also See for WF-2930:
- Start here (4 pages) ,
- User manual (245 pages) ,
- User manual (327 pages)
Table of Contents
Advertisement
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic:
Printing a Network Connection Report
You can print a network connection report to view solutions to any problems you may have using your
product on a network.
1. Make sure a few sheets of plain paper are loaded in the product.
2. Press the
3. Select Settings > Network Settings > Connection Check.
After the network connection is checked, you see a screen like this:
4. Press the
Examine the error codes and solutions shown on the network connection report.
Network Connection Report Codes and Messages
Parent topic:
Wi-Fi Networking
home button, if necessary.
start button to print the report.
Wi-Fi Networking
43
- Quick Links:
- Wf-2930 User's Guide
- Using the Control Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WF-2930 and is the answer not in the manual?
Questions and answers
Where do the documents I scan store if no printout?
My Epson WF-2930 printer is asking for administrator password.. what is it
How do you get rid of Ink Cartridge is Not Recognized. Have followed all suggestions including replacing cartridge with epson cartridge even put old cartridge back in
To fix the "Ink Cartridge is Not Recognized" error on the Epson WF-2930, follow these steps:
1. Use Genuine Epson Cartridges – Ensure you are using only Epson-branded cartridges, as third-party cartridges may not function properly.
2. Reinstall the Cartridge – Remove the cartridge and reinsert it firmly until it clicks into place.
3. Check for Protective Material – Make sure no protective tape or seals are left on the cartridge.
4. Restart the Printer – Turn off the printer, wait a few seconds, and turn it back on.
5. Update Firmware – If a firmware update was installed, non-Epson cartridges may stop working. Use only genuine Epson cartridges.
If the issue persists, refer to the online User’s Guide for further troubleshooting.
This answer is automatically generated
How to send a FAX
To send a fax using the Epson WF-2930, follow these steps:
1. Place the Originals
- Use the scanner glass or the Automatic Document Feeder (ADF) (WF-2930 Series only).
2. Select Fax Mode
- On the printer's control panel, select Fax using the navigation buttons, then press OK.
3. Specify the Recipient
- Enter the fax number of the recipient.
4. Adjust Fax Settings (Optional)
- Press OK, then select Menu.
- Choose Scan Settings or Fax Send Settings to adjust resolution or sending method if needed.
5. Send the Fax
- Press the x button to start sending.
### Notes:
- If the fax number is busy or there is a problem, the printer will redial after one minute.
- To cancel sending, press the y button.
- Sending a color fax takes longer as the printer scans and sends simultaneously.
This answer is automatically generated
how to change ink cartridges
To change the ink cartridges in the Epson WorkForce 2930 printer, follow these steps:
1. Turn off the printer – Press the power button to switch it off.
2. Open the ink chamber – Lift the ink chamber from the designated side.
3. Move the ink cartridges –
- If the cartridges are locked, unlock them by either giving a copy command before turning off the printer and unplugging it or by pushing the white lock forward while moving the cartridges to the left.
4. Refill or replace cartridges – Ensure all four cartridges are refilled or replaced to avoid receiving a refill message soon.
5. Use the correct cartridge type – The printer uses 232 ink cartridges.
Make sure to replace or refill the cartridges before receiving a message on the display panel to avoid issues.
This answer is automatically generated
Hopw to connect scanner to computer. Printer is connected
Hopw to connect scanner to computer; printer is connected
i have my settings CORRECT in the computer....printer will not print double sided when i want double sided...printer also sometimes has a delay in in printing....like a month later my printer printed the stuff in my queue....what the heck....WHY IS THIS SO DIFFICULT??????