Scan the QR code above to download the latest version of DJI Mimo app. The iOS version of DJI Mimo is compatible with iOS v12.0 and later. The Android version of DJI Mimo is compatible with Android v8.0 and later.
Getting Started Charging To charge Osmo Mobile 6, connect a USB adapter (not included) to the charging port using the power cable. The battery is fully charged when the battery level indicator turns off on the status panel. Charging time: approx. 1 hour 24 minutes (tested in the environment temperature of 25° C when using a 10 W charger) Max runtime: approx.
3. Align the marks on the phone clamp and the phone clamp mounting plate. Attach the mobile phone to Osmo Mobile 6. Osmo Mobile 6 will stabilize once the gimbal mode indicator lights up on the status panel.
Using Osmo Mobile 6 On-board Features Status Panel Displays the System Status Indicator, Battery Level Indicator, and Gimbal Mode. System Status Indicator Descriptions Blinking Pattern Descriptions Pulses red Magnetic is not aligned Solid yellow Bluetooth disconnected Solid green Bluetooth connected...
Page 9
Press and hold to enter lock mode. In lock mode, the gimbal will not follow the handle movements. Release to exit lock mode. Charging Port (USB-C) Charge Osmo Mobile 6 by connecting a USB adapter to this port. 1/4"-20 UNC Port The 1/4"-20 UNC port can be used to attach a tripod.
Page 10
Press the switch button, shutter/record button, and trigger simultaneously for more than one second to reset the Bluetooth name and connection and reconnect. Osmo Mobile 6 will be powered off automatically if there is no operation for three minutes in standby mode.
Side Grip Mode Low Position Mode Rotate Osmo Mobile 6 to the right or left Extend the built-in extension rod and by 90° to go from Upright to Side Grip adjust the angle to Low Position mode.
Home: tap to return to the home screen. Album: manage and view footage from the phone or DJI devices. Editor: tap to edit photos or videos from Osmo Mobile 6 or import and edit from a mobile device. Profile: register or log in to a DJI account. Tap the setting icon to access more settings.
2. Enable Bluetooth on the mobile phone and connect to the device with an OM6 prefix name in DJI Mimo. 3. Users are required to allow access to certain information when using DJI Mimo for the first time. The exact information will be listed in the prompt. An internet connection is required.
Page 14
Osmo Mobile 6 User Manual a. Drag a box on the screen in the camera view in DJI Mimo. A green box around the subject indicates ActiveTrack 5.0 is successfully enabled. Tap the icon on the top corner to stop tracking.
Page 15
Follow Speed: provides Fast, Medium, and Slow follow speed. Gimbal Auto Calibration: reduces drift caused by nearby magnetic interference or human error. Before calibrating, place Osmo Mobile 6 on a flat surface using a tripod. Do not touch the gimbal during calibration.
Before starting an update, make sure that the battery level indicator shows green or yellow. Connect Osmo Mobile 6 to your mobile device and launch DJI Mimo. You will be prompted if a new firmware update is available. To start updating, connect the mobile device to the internet and follow the on-screen instructions.
Need help?
Do you have a question about the OSMO MOBILE 6 and is the answer not in the manual?
Questions and answers